For comparison standard offerings are listed but most projects accommodate end user specifications.

Materials

• - Structural Steel, Base and Frame
• - Stainless Steel
• - Galvannealed Roof
• - Steel Tubing
• - 16 Gauge Galvannealed Wall Panels
  
  

No Size Limit

• - Width: standard up to 16’, 17' or greater with split up to 31'
• - Length: up to 120’
  
  

Load Capacity

• - Floor: not less than 250lbs psf
• - Roof: standard 85 psf, higher available
• - Wind: 125 mph
  
  

• Insulation

  • - Floor: up to R30
  • - Wall: up to R30
  • - Roof: up to R38
  • Standard painting
    • - Polyester outdoor powder coating standard on all external and internal surfaces
    • - Exterior & Floor: Carboline 890 (two part epoxy) 4-6 MILS DFT
    • - Base Underside: Maropoxy (two part epoxy) 4-6 MILS DFT
    • - Option for Polyester primer and clear top coat

• 
  - Control Panels
• - Switchgear
• - AC/DC Panel Boards, Transfer Switch
• - Battery/Battery Chargers
• - Termination Cabinet
• - RTU Equipment
• - Computer Floor
• - Heating & Air-conditioning
• - Battery and other auxiliary rooms
• - Interior and Exterior Lighting
• - Emergency Lighting & DC Lighting

• - Bullet resistant up to UL level 8
  
  • - Provisions for future expansion, removable end wall
  • - Custom door arrangements with alarms
  • - Windows
  • - Bathrooms
  • - Galvanized base, floorless building
  • - Emergency lighting and alarm systems
  • - Custom cable trays or computer floors
    
    
  • HVAC options
    • - Split & roof systems
    • - Louvers
    • - Vent fans
    • - Heating and air conditioning systems
      

• 
  - Substantial improvement of overall schedule
• - Overall cost of PDC substantially lower than brick& mortar
• - PDC delivery typically 12-16 weeks
• - Substantial reduction in front end engineering time
• - PDC arrives fully integrated – all equipment installed, cabled and tested
• - Factory environment for assembly of PDC makes for flexible solutions
• - PDC comes fully packaged – only field cables are to be connected
• - PDC unloading and placement on pad in less than 4 hours